SKHHPLA010 - Alps Electric SKHHPLA010 - Snap-in Type TACT Switch 6.0mm Square Type (Snap-in) SKHH Series

SKHHPLA010 - Alps Electric SKHHPLA010 - Snap-in Type TACT Switch 6.0mm Square...

Alps Electric SKHHPLA010 - Snap-in Type TACT Switch 6.0mm Square Type (Snap-in) SKHH Series Simple Type: Switch

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

100C max.: Conditions for Auto-dip Soldering
Capacity of soldering iron: 60W max.
Cold: -30±2C for 96h
Damp heat: 60±2C 90 to 95%RH for 96h
Dry heat: 80±2C for 96h
Duration of immersion: 5s max.
Duration of soldering: 3s max.
Flux built-up: Mounting surface should not be exposed to fluk
Initial Contact Resistance: 100mO max.
Insulation resistance: 100MO min. 100V DC
Number of soldering: 2 times max.
Operating direction: Vertical
Operating Force: 1.57N
Operating life: (5mA 5V DC)500,000 cycles
Operating Temperature Range: -30C to +85C
Preheating temperature: Ambient temperature of the soldered surface of PC board.
Preheating time: 60s ax.
Rating (Max.): 50mA 12V DC
Rating (min.): 10µA 1V DC
Series type: Sharp feeling type
Soldering temperature: 260C max.
Soldering temperature: 350C max.
Stem color: Dark gray
Stem Height: h-4.3mm
Travel: 0.25mm
Type: Snap-in
Vibration: 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively.
Voltage proof: 250V AC for 1 minute